Don't Scrap It, JB Weld It!


Reviews  [more]

There are currently no product reviews.

Testimonials

Very Satisfied Customer

Thank you for your advice, I did purchase and use the JB Weld. This product was very easy to use, I did not turn the refrigerator off and it set...
Read More ->


Original and the best!

Have been a long time user of JB Weld when I worked as a plant mechanic and engine rebuilder - still has a permanent place in my workshop. It is...
Read More ->


JB WELD FIRST TIMER

Hi have just purchased JB WELD, I will be trying it on my boat motor repair, If this works it will be saving me $2000 dollars in repair cost. Ill get...
Read More ->


Plastic Weld

Thought I should let you know just how well PlasticWeld performed on our Miele Microwave Oven. It has two plastic clips that secure the door when...
Read More ->


Duct Tape in a Tube

Duct Tape in a Tube

Click the image for a review by Yesterdays Tractor on JB Weld for the tractor restorer - some good information on where and when to use JB Weld when...
Read More ->


All Testimonials




Plastic Weld

Wednesday 20 August, 2014



Thought I should let you know just how well PlasticWeld performed on our Miele Microwave Oven.

It has two plastic clips that secure the door when pushed shut. The top clip broke off close to
where it enters the door.
Usually an Araldite fan (from my amateur fishing rod making days) I was not entirely happy making a
decision in its favour.
The broken piece of clip was about 25mm long by about 15mm deep and around 4-5mm thick - the break
was therefore
15mm x 4-5mm. Knowing that habits do not change easily I knew that the door would get the same push
or slam in the
closing process.

As the break was irregular and the plastic had a very rough finish I opted for NO CLEANING prior to
the mend process.
I did not want to have to do the repair twice knowing that adhesive over old adhesive was not worth
even thinking about.
So I opted for a small piece of fibre-glass mat over the one flat side of the clip then up and over
the broken area of the top of the
clip. Mixed a very small quantity of PLASTICWELD and applied to clip.

Then I found how difficult it is to hold a small item in place whilst adhesive sets! It took at
least 10 minutes - but better a slightly
longer set time than one that is too short! As soon as i was confident that I could take my
steadying hand away I applied the adhesive
to the fiberglass matt and with a tooth pick pushed it into place - rough and ready fix but I was
confident that I had done my best
under the circumstances.

Did not attempt to close the door for around 4 days and with about 60% confidence shut the door
fairly forcefully. Ho-lay! I was in business!
It is nearly a month since I made the repair and if PLASTICWELD was ever going to fail on this job
it would have done so by now.

Cannot tell you exactly how impressed I am with the performance of PLASTICWELD in this application!

Cheers and thank you, Tom
Testimonial By: Tom G.



JB WELD FIRST TIMER

Wednesday 30 October, 2013



Hi have just purchased JB WELD, I will be trying it on my boat motor repair, If this works it will be saving me $2000 dollars in repair cost. Ill get back to you to let you know how I went. Cheers Regards Mark
Testimonial By: Mark Hopgood — Upper Coomera, QLD, Australia



Very Satisfied Customer

Thursday 15 March, 2012



Thank you for your advice, I did purchase and use the JB Weld. This product was very easy to use, I did not turn the refrigerator off and it set very hard, bonding the thin inner door lining of the frig enabling me to fit the door shelf without further splitting. The delivery was very quick and the notifications of postage were appreciated.
Testimonial By: BP (NSW)



Duct Tape in a Tube

Sunday 08 January, 2012



Duct Tape in a Tube

Click the image for a review by Yesterdays Tractor on JB Weld for the tractor restorer - some good information on where and when to use JB Weld when restoring or repairing your antique tractor.
Testimonial By: Yesterday's Tractors



Original and the best!

Sunday 08 January, 2012



Have been a long time user of JB Weld when I worked as a plant mechanic and engine rebuilder - still has a permanent place in my workshop. It is fantastic quality and always helped us get up and running quickly - time is money so a quick and reliable repair was always appreciated.

How did that old advertisement go? "I liked the product so much that I bought the company". We didnt go that far but know this stuff is good and so are proud to bring the full range of quality JB Weld products to Australian customers.

cheers from Andrew Lane
Testimonial By: Andrew Lane







Content

Custom Left Slide Out

You can add any content here, text, images, etc.



your alt text here